40 cm series
MY-CL-NL-400
For the MoonYard 40 cm ceiling night light. The source PDF also includes the 30 cm product-family layout.
- Size
- 40 cm
- Power
- 36 W
- Controls
- Wireless remote / wall switch
Support center
Product manuals for MoonYard ceiling night lights.
Choose your model to download a lightweight PDF guide or review the key installation, safety, and remote-control notes online.
50 / 60 cm series
MY-CL-NL-500 & MY-CL-NL-600
For the larger MoonYard ceiling night light models with the same night-light and remote-control feature set.
- Sizes
- 50 cm / 60 cm
- Power
- 50 W / 60 W
- Controls
- Wireless remote / wall switch
At a glance
Shared specifications
Input voltage
200-230 V, 50 Hz
Light source
LED ceiling light with night-light mode
Color temperature
2700 K-6500 K, plus 2000 K night light
Dimming
5%-100% dimmable
Rated service life
30,000+ hours
Remote frequency
433 MHz, max RF power 10 mW
Before installation
Safety notes
Turn power off first
Disconnect electrical power before installation, maintenance, pairing work, or any wiring check.
Use a qualified electrician
Installation and maintenance should be completed by a qualified, licensed electrician.
Follow local regulations
The light must be installed according to applicable national and local electrical and building codes.
Installation overview
Use the PDF diagrams for final wiring
- Remove the mounting plate by rotating it clockwise.
- Route the power cable through the mounting plate.
- Fix the mounting plate to the ceiling using suitable screws and expansion plugs.
- Connect wiring with the supplied wire connector according to the manual diagram.
- Attach the ceiling light to the mounted base and confirm the fixture is secure.
Daily use
Wall switch and remote control
Wall-switch mode change
Toggle the wall switch off and on within 2 seconds to change lighting modes. After being off for more than 5 seconds, the light returns to the default downlight mode.
Remote functions
The remote supports front light on/off, night light on/off, color temperature, 3CCT selection, brightness, favorite setting, reading mode, sleep mode, relaxation mode, group A/B, and a 20-second off timer.
Remote pairing
The remote is factory paired and requires AAA batteries. To re-pair, turn the light on, then within 5 seconds press and hold the pairing button until the light flashes once.
Group control
To create a group, first unlink the remote from all lights. Turn on the lights to be grouped, then hold Group A or Group B until all selected lights flash once.
Need help?
Contact MoonYard support
For product questions, installation clarification, or marketplace support, contact us by email.